24-Port PoE.
Full Access Layer.
Every one of the ASW330's 24 downlink ports is Gigabit PoE-capable — IEEE 802.3af/at, up to 30W per port. Connect access points, IP cameras, VoIP phones, intercoms, and IoT sensors with no separate power supply. At the access layer of a hospitality, campus, or enterprise network it powers the entire floor from one device, and with 128 Gbps non-blocking capacity every port runs at wire speed at once.
Power the Entire Floor in One Rack Unit
24 PoE ports, 1U form factor. Deploy in the IDF to power every AP, camera, and phone on the floor — no separate power distribution.
720W
PoE Budget.
A 720W total budget is what separates a real access switch from one that throttles the moment the floor fills up. With 30W per port and 720W of headroom, the ASW330 powers 24 devices at maximum draw simultaneously — ideal for high-density WiFi 6 APs, HD IP cameras, or PoE lighting. The built-in AC supply accepts 100-240V and handles the full budget without an external adapter.
4× 10G SFP+
to the Core.
With 24 Gigabit downlinks generating up to 24 Gbps, a single 1G uplink would immediately bottleneck. The ASW330 breaks that ceiling with four 10G SFP+ slots — 40 Gbps of aggregate capacity when bonded via LACP. Connect via single-mode fiber to the EZE-CSW510 core, or any upstream aggregation device. Multiple uplinks also mean resilient, multi-path connectivity with no single point of failure.
Full L3
Management.
The ASW330 is a fully L3 managed switch — not just Web Smart. Configure via Web GUI, Console, Telnet, or SSH; monitor via SNMP v1/v2c/v3, Syslog, and RMON. The full set includes 802.1Q VLANs, QoS, ACL security, DHCP Snooping, IGMP Snooping, STP/RSTP/MSTP loop protection, static and LACP aggregation, IPv6 management, PoE scheduling, and port mirroring — managed by EZELINK from our GCC NOC with Zero Touch Provisioning.


