EZE-ASW210 — 16-Port L3 Managed PoE Switch | EZELINK
Managed Switch · Layer 3

EZE-ASW210
16-Port Gigabit L3 Managed PoE Switch

A 16-port Gigabit Layer 3 managed PoE+ switch with 4× 10G SFP+ uplinks and a 280W budget — wire-speed inter-VLAN routing for the intelligent edge across the GCC.

16×Gigabit PoE+
4× 10GSFP+ Uplinks
280WPoE Budget
L3Managed
EZE-ASW210 16-port L3 managed PoE switch
16× GbE PoE+
4× 10G SFP+
01
EZE-ASW210 front panel
EZE-ASW210 angled view
EZE-ASW210 side angle
EZE-ASW210 rear panel
16× PoE+Gigabit Ports
L3 RoutingOSPF / RIP
4× 10GSFP+ Uplinks
280WPoE Budget
01 · The Power

16-Port
PoE+ Power

One cable does both jobs. Each of the 16 Gigabit ports delivers up to 30W of PoE+ power alongside data — eliminating separate power supplies for every access point, IP camera, VoIP phone, and IoT device. A 280W total budget runs a full deployment of PoE devices simultaneously, without a single power brick in sight.

16× GbE PoE+ 30W Per Port 280W Total Budget IEEE 802.3at
280WTotal PoE Budget · 16 Gigabit Ports · IEEE 802.3at

One Cable, Two Jobs

Power and data over a single Cat5e/Cat6 run — ideal for access points, cameras, and phones in spaces where separate power is impractical.

02 · The Intelligence

Layer 3
Intelligence

Most small switches stop at Layer 2 — they separate VLANs but can't route between them. The ASW210 does both at wire speed. Static routing, RIP, and OSPF mean inter-VLAN traffic — guest WiFi to staff WiFi to security cameras — is routed locally inside the switch, without sending every packet to an overloaded firewall upstream.

L3 Static Routing RIP & OSPF Inter-VLAN Routing Wire-Speed
Inter-VLAN Routing — On the Switch
VLAN 10 · Guest VLAN 20 · Staff VLAN 30 · Cameras
ASW210L3 Routed
Traffic between VLANs is routed on the switch at wire speed — not backhauled to the gateway — cutting latency and offloading the firewall.
03 · The Uplink

4× 10G SFP+
Uplinks

16 devices generating Gigabit traffic need a fast path to the core. Four 10G SFP+ uplinks give the ASW210 40 Gbps of total uplink capacity — enough to aggregate all 16 access ports without any bottleneck. Connect via fiber for long runs to the distribution switch, or use DAC cables for low-cost, short rack connections.

4× 10GbE SFP+ Fiber or DAC 40 Gbps Total Uplink Link Aggregation

No Uplink Bottleneck

A 1G uplink saturates fast when 16 devices are active. Pair the ASW210 with the EZE-CSW510 core over 10G for a fully managed backbone.

04 · In Control

Enterprise
Management

A full L2/L3 feature set — 802.1Q VLANs, QoS prioritisation, port-based ACLs, storm control, IGMP snooping, and LLDP discovery. Manage through web GUI, CLI, or SNMP. EZELINK ships every ASW210 pre-configured via Zero Touch Provisioning, with ongoing management from our GCC NOC so your team focuses on the business, not the network.

802.1Q VLANs QoS ACL Security SNMP / Web / CLI
VLAN802.1Q tagged VLANs, inter-VLAN routing
QoS802.1p, DSCP, port-based priority
SecurityACL, storm control, DHCP snooping
AccessWeb GUI, CLI, SNMP v1/v2/v3
DiscoveryLLDP neighbour discovery
ProvisioningZero Touch Provisioning · 24/7 NOC
Technical Specifications

L3 Intelligence.
Edge-Ready Specs.

SwitchingLayerL3 Managed
PortsPoE+ Ports16× Gigabit PoE+
PortsUplink Ports4× 10G SFP+
PoEStandardIEEE 802.3at (PoE+)
PoEPer Port PowerUp to 30W
PoETotal PoE Budget280W
RoutingL3 ProtocolsStatic · RIP · OSPF
RoutingInter-VLAN RoutingYes — Wire Speed
L2 FeaturesVLANs802.1Q Tagged VLANs
L2 FeaturesQoS802.1p · DSCP · Port-Based
SecurityAccess ControlACL · Storm Control · DHCP Snooping
ManagementInterfacesWeb GUI · CLI · SNMP v1/v2/v3
PhysicalForm Factor1U Rack-Mountable
ManagementProvisioningZero Touch Provisioning
ManagementMonitoringEZELINK Cloud · 24/7 NOC
EZELINK · EZE-ASW210
Add L3 Intelligence
to Your Edge

Tell us about your branch office, SMB, or enterprise edge network and our engineers will design and deploy the ASW210 as part of a fully managed network across the GCC. Or browse the rest of the EZELINK product line.

Cart (0 items)